Reader support helps keep the reviews honest and the site humming. As an Amazon Associate, I earn from qualifying purchases.7 Best Brick Edging For Landscaping | Curb Appeal Without the Dig

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

You want a garden border that looks like neat brickwork without spending a weekend and a fortune on real masonry. The catch is that heavy brick edging is expensive, back-breaking to install, and permanent. So the market has shifted to faux-stone panels, galvanized steel strips, and heavy-duty plastic kits that mimic brick’s clean lines and sturdy feel — and you can install most of them in an afternoon.

I’m Rikta — the founder and writer behind Lawn Gear Lab. This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

The best brick edging for landscaping depends on if you want the authentic texture of faux stone, the raw durability of galvanized steel, or the flexibility of a no-dig plastic roll. Your choice depends on how much permanence you need versus how much you want to bend it into curves.

Quick Picks

How To Choose The Best Brick Edging For Landscaping

Brick edging creates a visible, physical barrier that stays put season after season. The wrong choice wastes your weekend and leaves gaps for weeds and mulch to spill through. Here are the three factors that determine whether your border actually works.

Height and Mulch Depth

The most common mistake is buying edging shorter than your mulch layer. You need the edging to rise at least an inch above the soil to trap bark or gravel. A 2-inch height works for a light top-dress (a thin surface layer), but if you use 2 to 3 inches of mulch, look for edging that is at least 3 inches tall — otherwise the material just washes over the top during heavy rain.

Material Durability

Your choice depends on plastic, steel, or resin (a hard, weather-resistant plastic that looks like stone). Plastic is budget-friendly, flexible for curves, and won’t rust, but it can become brittle over time in harsh sun. Galvanized steel (steel coated with a protective zinc layer to prevent rust) is essentially permanent and stands up to weed-eater contact, though it develops a weathered patina (surface color change) over time. Resin faux stone looks the most like real brick and resists cracking in freeze-thaw cycles, but it is heavier and costs more per linear foot.

Stake Quality and Quantity

Every flexible kit relies on stakes to stay anchored. The number of stakes included varies wildly — some kits provide one every foot, others leave you with gaps. Buyers consistently report that cheap plastic stakes snap during installation, while metal stakes or thick PE (polyethylene, a strong flexible plastic) spikes hold firm even in sandy soil. If a kit does not include enough stakes for your layout, budget for a separate pack of metal spikes.

Quick Comparison

Model Best For Height Total Length Material Amazon
Beuta Faux Stone Bricks Authentic brick look 2.25″ 4 x 48″ (16 ft) Resin Amazon
Corrugated Galvanized Steel Permanent straight borders 6″ 40 ft Galvanized steel Amazon
AGTEK 49FT Edging Kit Versatile curves & slopes 3″ 49 ft Plastic Amazon
FunFanso 40FT Edging Budget-friendly white border 5″ 40 ft Plastic (PE) Amazon
FunFanso 100FT Edging Large, no-dig lawn projects 2″ 100 ft Plastic (PE) Amazon
AMURS 20-Piece Border Small flower beds 5.9″ 20 ft Plastic (PP) Amazon
Jorvila Landscape Edging Curves with metal stakes 1.5″ 100 ft Plastic Amazon

In‑Depth Reviews

Best Overall

1. Beuta Landscape Edging Faux Stone Bricks (Greystone)

Resin Faux Stone4-Pack Panels

The only pick here that actually looks and feels like hand-laid brick.

Each section is a 48-inch panel of six individual faux bricks made from resin, a hard weather-resistant plastic. You get a deep gray stone texture and a 2.25-inch height that holds standard mulch in place. Buyers report it handles people standing on it, the grass edger, and all types of weather without cracking — the material is tough enough for high-traffic edges around flower beds and pathways. At 2.26 kilograms per panel, it is much lighter than real brick but carries the same visual weight.

The kit comes with 12 spikes total, and several owners mention that the end pieces do not include stakes — you need to buy an extra pack for the starting and ending bricks. Unlike the AGTEK plastic roll edging, this system gives you a rigid, permanent line without any bending or curling. It is the most expensive option per foot, but the finish is undeniably superior to any smooth plastic strip.

A reviewer who was initially skeptical said the product exceeded expectations once installed — it conforms well to bed shapes and looks realistic up close. The main limitation is total length: at 4 panels (roughly 16 feet), you need multiple kits for a sizable yard, so map your perimeter before ordering.

Looks like real work: If curb appeal is your top priority and you are edging a modest garden, the Beuta panels give you a brick-like finish that no plastic roll can match. The catch is the price per foot — budget at least two kits for a typical front garden, and factor in extra stakes for the ends.

Reach for this if: you want the classic brick look without mixing mortar.

Look elsewhere if: you need to edge a long, curved driveway on a tight budget.

Premium Pick

2. Corrugated Galvanized Steel Landscape Edging (6″ x 40Ft)

Galvanized Steel40 ft Roll

The brute-force solution that keeps the toughest weeds out.

This is a 40-foot roll of black, corrugated (ridged for strength) galvanized steel (steel with a protective zinc coating) standing 6 inches tall. That extra depth is the key difference: one reviewer buried it 8 inches deep to block bermudagrass roots from invading flower beds, and it worked. The metal has rounded R-shaped top and bottom edges, so customers note no sharp edges to worry about, and the pre-rusted finish gives a rustic look that blends into the garden.

At 4.54 kilograms, this is at 4.54 kilograms. Installation requires cutting the ground with a flat shovel, aligning the strip, and pounding it in with a mallet and 2×4 — it is more work than a no-dig plastic kit, but the result is essentially permanent. Unlike the FunFanso plastic borders that can pop out of sandy soil, the steel stays locked, even through strong winds and heavy rain.

Reviewers point out that it is flexible enough for gentle curves but really shines on straight runs. The item dimensions are 480 inches by 6 inches, so one roll covers 40 linear feet. If you need to contain aggressive grass or create a raised bed barrier, this outperforms every plastic alternative here by a wide margin.

Solid as it gets

  • 6-inch height blocks deep roots and holds thick mulch
  • Corrugated steel bends without cracking for custom shapes
  • Smooth rolled edges — no sharp metal to cut your hands

Plan for the effort

  • Requires trenching and a mallet — not a 10-minute install
  • Pre-rusted finish may not match every landscape style

Best for: anyone battling invasive grass or needing a tall, immovable barrier.

skip it if: you want a quick, decorative border that does not involve digging.

Most Versatile

3. AGTEK Garden Edging Kit (3″ x 49Ft with 30 Stakes)

3-inch Height49 ft Kit

The 3-inch height hits the balance for most flower beds.

This kit gives you a 49-foot roll of flexible black plastic edging plus 30 stakes, and the 3-inch height is the crucial spec. One reviewer explained the logic clearly: a 3-inch edging works perfectly on slopes where mulch tends to slide — you bury about 1.5 inches and leave 1.5 inches exposed, or you can bury 1.5 inches and show 1.5 inches for level pathways. That is exactly the range most homeowners need for 2 inches of mulch without losing containment.

Installation is straightforward: tap the top of the edging with a rubber mallet to drive it into soft soil, or dig a shallow trench for harder ground. Shoppers say the edging is flexible enough for right angles and curves but note that it looks less clean than the Corrugated Galvanized Steel edging — the plastic lacks the sharp lines of metal. A recurring comment is that 30 stakes are adequate for straight runs but you will want more if your layout involves tight curves.

Compared to the 2-inch FunFanso 100FT option, this 3-inch version gives you that critical inch of clearance that prevents mulch washout. The plastic will not rust or rot, and buyers confirm it holds up well after several months outdoors.

Smart sizing: The 3-inch profile is tall enough to contain mulch on a slope but short enough to leave exposed edge that does not look obtrusive. Just order extra stakes if you are curving around garden beds.

Reach for this if: you have mixed terrain with straight sections and curves.

Look elsewhere if: you prefer a metal edge for rigid, permanent lines.

Best Value

4. FunFanso Landscape Edging Border Kit (5in x 40FT, White)

5-inch TallWhite Finish

A white 5-inch border that stands out at a budget price.

This kit includes a 40-foot roll of white PE (polyethylene) plastic edging that stands 5 inches talland comes with 72 stakes. The white color creates a very clean visual line around flower beds and pathways, and the raised height means you only need to expose about 2 inches above ground for a distinctive border, leaving 3 inches buried for stability. Buyers report the stakes are good quality and that the 2-inch height is perfect for a small bed with mulch.

The material is thickened PE plastic, which feels less likely to crack in the sun compared to thinner polypropylene (PP, a stiffer plastic) alternatives. Installation requires no digging — just hammer the spikes into loose ground and snap the edging onto them. However, one reviewer noted that the kit does not include enough stakes for a full installation in sandy soil, where you need stakes every foot or so. The seller did not respond to an email about extra stakes, so plan to supplement if your soil is loose.

At 5 inches tall with a white finish, this is among the most visible borders here. It is best suited for edging that you want to be seen — a bright, intentional border around a pathway or patio garden.

White and bright

  • Tall 5-inch profile stays visible and holds deeper mulch
  • 72 stakes included — generous count for most yards
  • No digging required on loose ground

One shortfall

  • Sandy soil demands extra stakes not included in the kit

Best for: creating a bright, clean edge around flower beds on prepped soil.

pass on it if: you need a subtle, dark border that blends into the lawn.

Large Area Pick

5. FunFanso 100FT Landscape Edging Border (2″ x 100 Ft, Black)

100 ft Coverage150 Stakes

Massive coverage for the price — 100 feet of black edging with 150 stakes.

If you are edging a large lawn or multiple flower beds, this 100-foot kit delivers the most linear feet per dollar in this guide. It comes as two 50-foot rolls of black PE plastic, each 2 inches tall, plus 150 heavy-duty plastic spikes. The manufacturer claims 5 stakes per meter versus the standard 3, and buyers confirm the stakes hold well without breaking during installation. A reviewer mentioned that the edging is very pliable yet sturdy, and not a single spike broke while driving them in.

The 2-inch height is the trade-off. Several reviewers wished they had gone with the 3-inch AGTEK version instead — at 2 inches, this edging is best for light ground cover, not deep mulch. One buyer found the advertised 200 feet actually came out to 180 feet in three 60-foot rolls. If your beds use 2 to 3 inches of bark or gravel, the 2-inch profile will be too low to contain it after rain. On the positive side, the plastic cuts easily with scissors and does not rust, so it is a practical choice for separating grass from pathway pavers.

Compare this to the AGTEK 3-inch kit above: the FunFanso gives you double the length but sacrifices an inch of height. For level, low-mulch borders, it is a real bargain.

Length over height: At 100 feet with 150 stakes, this is the volume leader. The 2-inch height works for light separation but cannot hold thick mulch — measure your mulch depth before buying.

Reach for this if: you need to edge a large yard with shallow gravel or grass separation.

Look elsewhere if: your flower beds use 2 or more inches of deep mulch.

Metal Stakes

6. Jorvila Landscape Edging (1.5″ x 100′ with 120 Metal Spikes)

1.5-inch Height120 Metal Spikes

The only kit here that pairs metal stakes with flexible plastic edging.

Jorvila’s 100-foot roll (sold as three 33.3-foot sections) stands just 1.5 inches tall. The standout feature is the stakes: 120 metal spikes with a U-shaped design that grips the plastic better than the standard plastic stakes in other kits. Buyers confirm the metal holds well in rocky and rooted areas, and the spikes are rust-resistant, so they should last seasons without corroding. A reviewer said the stability impressed them, and the edging came with plenty of stakes.

The 1.5-inch height is a real limitation. Multiple buyers mention that if you use 2 inches or more of mulch, the edging is too low — the mulch just washes over the top. A reviewer who used it for a rock garden found it snug and easy to install, but recommended upgrading to a 2-inch-plus version for deeper beds. The plastic itself is flexible without cracking, and it cuts cleanly with scissors, so custom shaping is straightforward.

If your application is a light ground cover or defining a path edge without any mulch at all, the metal stakes make this kit unusually secure. But the low height means it cannot compete with the AGTEK or FunFanso 100-foot options for mulch containment.

Secure hold

  • 120 metal U-shaped spikes grip better than plastic
  • Flexible plastic withstands curves without snapping
  • Sold in three manageable 33.3-ft sections

Height check

  • 1.5 inches is too short for 2-inch-plus mulch layers
  • May need extra stakes if spacing every 2-3 holes

Best for: low-profile path edging or rock gardens where deep mulch is not a concern.

it’s not for you if: your flower beds use standard 2-inch or thicker mulch.

Budget Pick

7. AMURS 20-Piece Garden Edging Border (20Ft, White Plastic)

20-Piece KitWhite Finish

A quick 20-foot border for small flower beds on a tight budget.

This kit gives you 20 interlocking white plastic panels, each measuring 12.16 inches wide by 5.9 inches tall, for a total length of about 20 feet. The material is polypropylene (PP, a stiff plastic), which resists crushing and corrosion. At 2.26 kilograms total, and the individual panels snap together without tools — just push them into soft ground with a mallet.

The real weakness, confirmed by multiple reviewers, is the securing pins. One buyer called them “some of the most worthless plastic imaginable” and had to reinforce them with tent spikes. The panels themselves look good and are easy to assemble, but they are shorter than expected — the 5.9-inch measurement is the width of the front face, not the buried depth. In hard ground, the system lacks the rigidity to stay upright without additional metal stakes.

Compared to the FunFanso 40FT kit above, which costs roughly the same for double the length and better stakes, the AMURS is better suited as a decorative accent for a very small garden corner rather than a serious perimeter barrier.

Looks nice, weak spine: The white PP panels create a clean aesthetic for a small flower bed, but the included stakes do not hold. Plan to replace them with metal landscape spikes or tent stakes for a lasting install.

Reach for this if: you need a quick, decorative border for a tiny bed and you have other stakes on hand.

Look elsewhere if: you want a sturdy perimeter that stays upright without extra hardware.

Understanding the Specs

Height vs. Mulch Depth

The exposed height of your edging determines how well it contains mulch, gravel, or soil. A 2-inch height is fine for a thin layer of bark, but 3 inches or more is the balance for standard 2-inch mulch beds. Taller edging (5-6 inches) can be buried deeper to block roots or left exposed for a dramatic border. Buyers consistently regret buying too-short edging — mulch spills over in rain, and the border looks like an afterthought.

Material and Weather Resistance

Plastic (PE or PP) is lightweight, rust-proof, and flexible, which makes it easy to install around curves. The trade-off is that cheap plastic can become brittle after a few seasons in direct sun. Galvanized steel is heavier and requires more effort to install, but it will outlast any plastic option and resists weed-eater damage. Resin faux stone mimics real brick’s appearance and handles freeze-thaw cycles well, but it costs the most per foot and does not bend for curves.

Stake Quantity and Quality

Flexible edging relies on stakes to stay in place. Plastic stakes are common in budget kits but buyers frequently report them snapping during installation. Metal spikes cost a little more but grip better in sandy or rocky soil. As a rule of thumb, you want one stake every 12 to 18 inches for a secure install. Always check the total stakes included — a 40-foot kit with only 20 stakes will leave large gaps.

Installation Method

No-dig edging is the main selling point of plastic rolls and snap-together panels — you just hammer stakes into the ground. This works well on loose soil but struggles in hard clay or rocky ground, where you may need to dig a shallow trench first. Galvanized steel and faux-stone panels often require trenching or a mallet, adding an hour or two to the project but resulting in a much more permanent edge.

FAQ

How tall should brick edging be for a flower bed?
The ideal exposed height depends on your mulch depth. A 2-inch height works for a thin layer of bark, but 3 inches is the standard recommendation for most beds using 2 inches of mulch. If you use 3 inches of mulch or the bed is on a slope, go with 5 to 6 inches to prevent washout.
Is metal edging better than plastic for brick-style borders?
Metal (galvanized steel) is more permanent, handles weed-eater contact, and will not crack in direct sun like plastic can after several seasons. The trade-off is that metal is harder to bend into tight curves and usually requires digging a trench. Plastic is lighter, cheaper, and flexible, but cheaper grades can become brittle over time.
Can I install brick edging without digging?
Yes — most plastic roll edging and snap-together panel kits are marketed as no-dig. You drive stakes into the ground with a mallet and attach the edging. This only works well in loose soil; in hard clay or rocky ground, you will need to dig a shallow trench first to seat the edging properly.
How many stakes do I need for a 40-foot border?
Aim for one stake every 12 to 18 inches. That means about 27 to 40 stakes for a 40-foot run. Many budget kits skimp on stakes and include only 20 to 25, so check the quantity before buying — especially if you have curves, which need more stakes to hold the shape.
Will faux stone brick edging crack in winter?
The Beuta resin panels are designed to hold their integrity through all seasons and freeze-thaw cycles. Resin is more flexible than real brick, so it absorbs ground movement better. Still, no plastic or resin is indestructible — if the ground heaves significantly, any edging can shift over time.
Can I cut plastic edging to length?
Yes. PE plastic edging (like the FunFanso and Jorvila rolls) cuts cleanly with heavy-duty scissors or tin snips. Polypropylene panels like the AMURS snap-apart pieces can also be cut, but the edges may not look as clean. Steel edging requires metal snips and is harder to cut neatly.
What is the difference between PE and PP plastic for edging?
PE (polyethylene) is more flexible and resistant to impact, making it the common choice for rolled edging that bends around curves. PP (polypropylene) is stiffer and more rigid, which works for interlocking panels but makes it more prone to cracking under stress. Both will resist rot and corrosion outdoors.
How do I keep edging in place on a slope?
On a slope, bury the edging deeper — expose only 1 to 1.5 inches above ground — and use metal stakes spaced every 12 inches. The AGTEK kit at 3 inches tall is a good choice because you can bury half and still have enough exposed height to hold mulch. Avoid edging shorter than 2 inches on any incline.
Can I paint galvanized steel edging a different color?
Yes, but you need to use a primer formulated for galvanized metal. Regular paint will peel off the slick zinc coating in a season. The Corrugated Garden Edging comes pre-rusted for a rustic finish, so painting it defeats that weathered look. If you want a custom color, choose a black or unpainted steel option instead.
Will low plastic edging stop grass from growing into the bed?
A plastic edging that is only 1.5 to 2 inches tall will not stop aggressive spreading grass like bermudagrass or crabgrass. Those roots run deeper than the edging can block. For invasive grass control, you need a 6-inch buried steel strip like the Corrugated Garden Edging. Plastic borders are best for separating soil from gravel or bark, not for blocking rhizomes.

Final Thoughts: The Verdict

For the majority of shoppers, the best brick edging for landscaping is the Beuta Faux Stone Bricks because it delivers the classic brick look with resin’s weather resistance and easy install, giving you the highest curb appeal per panel. If you want a permanent, impenetrable barrier for tricky weeds, go with the Corrugated Galvanized Steel — its 6-inch height buries deep enough to stop bermudagrass. And for large, no-dig projects on a budget, the AGTEK 49FT Kit at 3 inches tall strikes the best balance of coverage, flexibility, and price.

How We Picked

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources & Methodology

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of July 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Lawn Gear Lab earns from qualifying purchases. This does not affect which products we feature.

Related Guides

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.