Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
When the first hard freeze hits or the deer start rubbing bark off your young maples, a real burlap wrap is the difference between a tree that pulls through and one that sets you back a season. The trick is finding a roll that is thick enough to insulate, breathable enough to prevent rot, and long enough to actually finish the job without splicing pieces together.
I’m Rikta — the founder and writer behind Lawn Gear Lab. This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
You need burlap tree protection that stops winter sun scald on a Japanese maple or shields an orchard from a Texas freeze. The right choice depends on width, weave, and total length — plus honest quirks like the natural jute smell.
Quick Picks
- VEVOR Burlap Fabric Roll, 14” x 150 ft — Top Performer
- Tree Wrap for Winter, 10inch Wide X 32FT Burlap — Heavyweight Pick
- Butarfe 40″ x33 Feet Gardening Burlap Roll — Best Value
- 4Roll Jute Burlap Tree Wraps 7.8″×9.8′ Winter — Value 4-Pack
- 15.7in x 19.7ft Natural Burlap Tree Wrap Rolls — Best for Ground
- Dewitt 3-Foot by 48-Foot Burlap NB348 — Ground & Erosion
- koretech 40″ x 80 Feet Burlap Roll Multipurpose — Large Roll
How To Choose The Best Burlap Tree Protection
Three numbers matter more than anything else when you are shopping for burlap tree wraps: the width, the total length per roll, and the weave density. Get those right and you get full coverage with no gaps. Miss them and you end up with a roll that is too narrow to wrap a trunk or too short to reach the first branch.
Width vs. Trunk Diameter
A 7.8-inch wrap is fine for a young sapling, but a mature oak with a thick trunk needs something closer to 15 inches or wider. Measure the circumference of your tree at chest height, then pick a width that lets you spiral up with at least a 50% overlap — that overlap is what stops cold air from reaching the bark.
Length: How Many Trees Per Roll
One review notes buyers needed two rolls for a single live oak. A 32-foot wrap covers roughly one medium tree with a single pass, while a 150-foot roll from a premium option like the VEVOR can handle a row of shrubs or a dozen saplings. Estimate 10 to 15 feet per small tree and 20 to 30 feet per large one.
Weave Density and Breathability
Loose weaves let air circulate freely (good for humid climates) but provide less insulation. Tight weaves like the 45 x 45 density on the VEVOR roll block wind and sun better but can trap moisture if you wrap too tight. For most winter protection, a medium weave that lets some light through is the safe middle ground.
Quick Comparison
| Model | Best For | Width | Length | Weave Type | Amazon |
|---|---|---|---|---|---|
| VEVOR Burlap Fabric Roll | Heavy-Duty Coverage | 14 in | 150 ft | High Density | Amazon |
| Tree Wrap for Winter, 32FT | Single-Tree Protection | 10 in | 32 ft | Jute | Amazon |
| Butarfe 40″ x 33 Feet | Wide Coverage / Crafts | 40 in | 33 ft | Basket | Amazon |
| 4Roll Jute Burlap 7.8″×9.8′ | Multi-Tree Set | 7.8 in | 40 ft (4 rolls) | Jute | Amazon |
| 15.7in x 19.7ft Natural Burlap | Wide Single Wrap | 15.7 in | 19.7 ft | Burlap | Amazon |
| Dewitt 3-Foot x 48-Foot NB348 | Erosion Control / Ground | 36 in | 48 ft | Medium Weave | Amazon |
| koretech 40″ x 80 Feet | Large Shrubs / Multiple Trees | 40 in | 80 ft | Plain | Amazon |
In‑Depth Reviews
1. VEVOR Burlap Fabric Roll, 14” x 150 ft
The 150-foot roll that covers an entire hedge row without splicing a single piece.
You get a 14-inch wide roll that runs 150 feet long — enough to wrap a dozen young trees or a long row of shrubs in one go. The weave is rated at 45 x 45 density, which buyers report is “tightly woven, thick material” that blocks sun and wind better than most standard burlap. At 10.14 pounds, the roll itself has heft; one reviewer used it as an aisle runner for an outdoor wedding and noted the tight weave gave it a sheen that looked deliberate.
The dense construction makes it effective as a weed barrier fabric too — reviewers mention it suppresses weeds better than loose-weave burlap because light barely gets through. That same tightness means you should leave a little breathing room when wrapping trunks in humid climates, otherwise moisture can get trapped between the wrap and the bark. Buyers also note the natural jute smell is present out of the package, which is typical for any fresh burlap roll.
It is a premium pick that earns its spot by delivering the longest single-roll coverage with the tightest weave in this comparison — for a big property or multiple trees, you simply won’t run out halfway through.
Why it earns the top spot
- 150 ft length covers more without splicing — none of the other rolls here come close in total length
- 45 x 45 high density weave rated at 250 g weight for a durable, thick barrier
- Made from 100% natural hemp fibers; biodegradable and environmentally friendly
Keep in mind
- Dense weave can trap moisture if wrapped too tight around trunks
- Natural jute smell noticeable at first; airing it out for a day helps
Reach for this if: you need to protect a row of shrubs, multiple fruit trees, or a long hedge — the 150 ft length and 14-inch width let you cover ground without stopping.
Look elsewhere if: you only have one small sapling to wrap and don’t want to store a big roll.
2. Tree Wrap for Winter, 10inch Wide X 32FT Burlap Fabric Tree Protectors
The heavyweight burlap that reviewers call the nicest they have bought on Amazon.
“Heavyweight. Not flimsy. High quality IMO,” one reviewer noted, and the pattern across reviews backs that up: multiple people describe this 32-foot wrap as thicker and denser than typical burlap they have handled. The 10-inch width is a practical middle ground — wide enough to overlap on a medium trunk but not so wide that it bunches awkwardly on a narrow sapling. It is made from natural jute cloth that is breathable and wrinkle-resistant, so it conforms to the tree shape without fighting you.
The trade-off several buyers point out: when the burlap gets soaked by rain or snowmelt, it gets noticeably heavy. You may need extra twine or tape at the top to keep it from sliding down under the added weight. Some also note a strong chemical smell when opening the package, which usually fades after a day or two in the open air. Compared to the 4Roll Jute Burlap set below, this single roll gives you a wider wrap (10 inches vs 7.8 inches) and a denser feel that one reviewer called “well made and a little heavier.”
If you are protecting one or two trees and want a thick, substantial wrap that feels like it will last the whole winter, this is the roll to grab.
What stands out
- Buyers consistently call it thick and heavy-duty — “nicest burlap I’ve purchase on Amazon”
- 10-inch width offers better trunk coverage than narrower 7.8-inch wraps
- Made of natural jute; breathable and biodegradable
The catch
- Gets heavy when rain-soaked; can sag if not tied securely at the top
- Some owners mention a strong smell that needs a day to air out
This one is for you if: you want a single, dense roll for wrapping a medium fruit tree or ornamental — the 10-inch width and thicker weave give you solid winter protection.
skip it if: you need to wrap many thin saplings and would prefer a multi-roll set for convenience.
3. Butarfe 40″ x33 Feet Gardening Burlap Roll
The 40-inch-wide sheet that doubles as a tree wrap and a ground cover.
Most tree wraps come in narrow rolls around 10 to 15 inches wide, so a 40-inch-wide roll that runs 33 feet is its own category — you can wrap a thick trunk in a single pass or lay it flat over a seeded patch. One buyer mentioned using it to “cover reseeded areas after tree damage; grass grew fast under burlap,” and even loaned a piece to a neighbor for yard repair. The basket weave is looser than high-density options, which means excellent airflow for the trunk, but you may want two layers if you are trying to block strong wind or direct sun.
At 1.87 kilograms, this is a substantial piece of fabric that stays put once draped. It is 100% natural jute and biodegradable, so you can leave it on through the season and let it break down into the soil over time. Customers note the smell is typical for fresh burlap — “strong smell to the burlap tho. It faded away a few days later,” one owner reported. Compared to the narrower 15.7-inch roll from DECOHS, this Butarfe roll gives you more than double the width for roughly the same total square footage, making it far more versatile for non-tree uses.
For the person who wants one roll that can protect a tree, cover a garden bed, or dress a wedding table, this is the most versatile option here.
Why it is versatile
- 40-inch width is the widest in this comparison — wrap thick trunks or lay flat over garden beds
- 100% natural jute; biodegradable and renewable
- 33-foot length gives you a solid 110 square feet of coverage
Limitations
- Loose basket weave may need double layering for full insulation
- Natural jute smell present; airing it out for a day is recommended
Best suited for: someone who wants a single roll for tree protection plus garden bed covering, crafts, or decor — the width makes it a multi-purpose tool.
Not the best choice if: you only need a narrow wrap for thin saplings; the 40-inch width is overkill for a 2-inch trunk.
4. 4Roll Jute Burlap Tree Wraps 7.8″×9.8′ Winter Tree Protector Wraps
Four separate rolls so you can wrap multiple trees without sharing one long spool.
Each roll is 7.8 inches wide and 9.8 feet long, giving you 40 total feet of jute burlap across four individual wraps. The real advantage is convenience: you can hand one roll to a helper, wrap two trees at once, or store them in different locations without dragging a giant spool around the yard. One buyer with an October Glory maple reported the tree “got sunburned a couple of years ago with an extreme summer heat spell” and that these wraps “worked wonderfully to secure the bark and protect the trunk.”
Despite the lightweight feel, reviewers point out the material is breathable and dries faster than most wraps after rain — an important detail if you live in a wet climate where moisture trapped against bark can lead to rot. The 7.8-inch width is narrow enough to follow a spiral path up a slender trunk without bunching, but you may need two rolls for a single large tree. Compared to the 10-inch fowong wrap above, this set trades a denser single roll for the flexibility of multiple narrower rolls, and the reviews praise its ease of install: “You can secure it by tucking or twine.”
If you have a row of young saplings or a mix of shrubs that each need their own wrap, this four-pack saves you the hassle of cutting and measuring from one big roll.
Why the 4-roll format works
- Four individual wraps — no measuring or cutting, just grab and wrap
- 40 ft total length with all four rolls combined
- Breathable jute dries faster than many competitor wraps after rain
Drawbacks
- Narrow 7.8-inch width means you may need two rolls per large tree
- At 9.8 ft per roll, a single wrap may be short for tall trunks
Perfect for: anyone who needs to protect a row of young trees or several shrubs at once — handing out separate rolls is much easier than unspooling one long piece.
Not ideal for: a single large tree with a thick trunk; the narrow width and individual roll length may require multiple rolls per tree.
5. 15.7in x 19.7ft Natural Burlap Tree Wrap Rolls with Ropes
A 15.7-inch-wide wrap that comes with 65.6 feet of rope for securing it tight.
With a width of 15.7 inches and a length of 19.7 feet, this roll is built for one larger tree rather than several small ones — the generous width gives you good overlap on a wide trunk. The included rope is 65.6 feet long, which is more than enough to cinch the wrap at the bottom, middle, and top without needing extra twine. One customer observed that this “natural burlap tree wrap; protected live oak from Texas freeze,” noting it took two rolls per tree and that you can install it early and leave it on all season.
The burlap itself is described by reviewers as “good quality” and “great material” — it saved potted lavender from freezing over the winter when wrapped around the plastic pots. Some loose fibers blow around for the first hour after hanging, so expect a bit of mess during installation. Compared to the 3-foot-wide Dewitt roll below, this one is narrower and shorter, which makes it easier to handle for a single tree but less suited for ground-level erosion jobs. Buyers appreciated that the 15.7-inch width “can cover one or two trees” when used strategically.
If you want a straightforward, wide single roll that includes the rope right in the package, this is a no-fuss option for one or two trees.
What you get from the start
- 15.7-inch wide roll — wider than standard 10-inch wraps for better trunk coverage
- 65.6 ft of rope included so you don’t need to buy extra twine
- Natural burlap material is breathable, thick, and wrinkle-resistant
Consider this
- Only 19.7 ft long — may need two rolls for a tall tree or large shrub
- Some loose fibers blow around during the first hour after installation
Best for: a single medium-to-large tree where the 15.7-inch width gives you the overlap you need for good coverage.
Consider another option if: you have multiple trees to wrap and want a longer roll to avoid buying extras.
6. Dewitt 3-Foot by 48-Foot Burlap NB348
The 3-foot-wide roll designed to stop erosion and cover ground, not just wrap trunks.
At 3 feet wide and 48 feet long, the Dewitt NB348 is built for horizontal coverage — think slope erosion control, wind screens, or covering a strawberry bed. It is a medium-weave jute carpet backing cloth with 6% oil content and 16% moisture regain, which means it holds up to outdoor moisture without falling apart quickly. Reviewers found a hundred uses: one uses it under citrus trees to reduce mud, another lines hanging baskets with it, and a third wraps potted plants for hurricane protection. It is also biodegradable, so you can lay it on a seeded slope and let it break down into the soil over time.
The loose weave is intentional — it lets water and air pass through, which makes it ideal for erosion blankets and wind screens — but it is “not weed-proof,” as one user highlighted. If you are using it as a tree wrap, the 36-inch width is far wider than you need for most trunks, and the loose weave provides less insulation than the dense VEVOR roll. However, for the buyer who needs a roll that can cover a garden bed, protect a row of shrubs, and still have leftover for craft projects, this Dewitt roll is the most proven brand name in the lineup.
It is not the best straight tree wrap, but for anyone managing a property with erosion or bare soil between trees, it is the single most versatile ground cover here.
Why it is a different kind of tool
- 36-inch width and 48-foot length cover large ground areas in one pass
- Medium-weave jute lets water and air through — ideal for erosion control
- Biodegradable; breaks down into soil over time
Limitations for tree wrapping
- Loose weave reduces insulation value compared to denser wraps
- 36-inch width is oversized for most tree trunks; you will need to cut it down
Grab this one if: your main project is erosion control, slope stabilization, or covering a large garden bed — the 3-foot width makes it ideal for horizontal use.
Skip it for tree wrapping: the loose weave and wide width are not optimal for trunk insulation; a narrower, denser roll will serve you better.
7. koretech 40″ x 80 Feet Burlap Roll Multipurpose High Density
An 80-foot-long, 40-inch-wide roll that can wrap 7-foot evergreens in one continuous piece.
This is the largest roll by surface area in the comparison — 40 inches wide and 80 feet long gives you about 267 square feet of natural jute burlap. One reviewer wrapped their arborvitae evergreens and reported “the deer did not eat them at all. The burlap is strong and easy to wrap the evergreens to protect them from deer, strong winter winds and snow damage.” The 40-inch width is wide enough to cover a 4-to-5-foot shrub in one vertical pass, and the 80-foot length handles multiple large evergreens or a row of trees.
The plain weave is dense enough for protection but some shoppers say significant thread shredding at the cut ends — manageable if you trim the loose threads when storing. A reviewer who used it as a triple-lined weed barrier on a gravel path found it needed multiple layers because a single ply is too porous to stop weeds. Compared to the 40-inch Butarfe roll (33 feet), this one gives you nearly two and a half times the length, making it the better choice if you have a long hedge or several large trees to wrap. The natural jute smell shows up at the end of the roll, a trait one reviewer described as a “strong chemical/petroleum smell” that fades over time.
For large landscaping jobs where you need to cover multiple trees or a long stretch of shrubs, this is the most cost-efficient way to get that much burlap in one piece.
Why go big
- 40-inch width and 80-foot length — the largest surface area in this comparison
- Strong enough to deter deer, per buyer reports on 7-foot evergreens
- Wear-resistant fabric that holds up in harsh outdoor conditions
Things to know
- Significant thread shedding at cut ends; be ready to trim loose fibers
- Strong smell reported at the end of the roll; airing it out helps
Perfect for: covering a large hedge or multiple 6-7 foot evergreens in one go — the 80-foot length means fewer splices.
Not for: someone with just one small tree; the roll is large and bulky to store after cutting a small piece off.
Understanding the Specs
Width Matters
The width determines how much of the trunk you cover with each spiral. A 7.8-inch wrap is fine for a sapling under 2 inches in diameter, but a tree with a 12-inch trunk needs at least a 15-inch-wide roll so you get good overlap. The wider the roll, the fewer spirals you need to cover the height of the trunk — and the less chance cold air finds a gap between layers.
Weave Density
Weave density controls the trade-off between insulation and breathability. A high-density weave like 45 x 45 (used by VEVOR) blocks more wind and sun, making it better for winter freeze protection. A looser basket weave (like the Butarfe roll) lets more air circulate, which is safer for humid climates where moisture trapped against bark can cause rot. Most jute burlap sits somewhere in the middle — visible light passes through, but wind speed is reduced.
FAQ
Will burlap tree wraps protect against deer?
How long does burlap tree wrap last outdoors?
Can burlap tree wraps cause rot or fungus?
Will burlap protect against sun scald in summer?
Does burlap stop weeds from growing?
How do I get rid of the burlap smell?
Can I cut and sew burlap for crafts?
How many trees can one roll cover?
Is burlap tree wrap safe for vegetable gardens?
Final Thoughts: The Verdict
For the majority of shoppers, the burlap tree protection winner is the VEVOR Burlap Fabric Roll because its 150-foot length and 45×45 high-density weave give you the most coverage and insulation per dollar. If you want a thick single-tree wrap that buyers call “the nicest burlap” they have bought, grab the Tree Wrap for Winter 32FT. And for protecting multiple evergreens from deer while covering a large area, the koretech 40″ x 80 Feet roll gives you the most surface area — 267 square feet — in one roll.
How We Picked
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources & Methodology
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of July 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Lawn Gear Lab earns from qualifying purchases. This does not affect which products we feature.